Diesel Generator Set Technology

• How Generator Power Factor to Calculation, Correction and Improvement?

  Sep 28 , 2025

  Power Factor Power Factor (PF) is a crucial indicator in diesel generator sets for measuring electrical energy utilization efficiency. It represents the ratio of active power to apparent power. It reflects the degree to which electrical energy is effectively used and is typically expressed as a decimal or percentage. Cummins Generator details the calculation, correction, and improvement methods fo...

  Tags : Power Factor Of Diesel Generator Generator Set Power Factor 0.8 Apparent Power Diesel Generator

  Read More
• How To Matching Generator Sets with UPS

  Sep 20 , 2025

  With technological advancements, various industries rely on uninterrupted power supply to support their information-based operations. Power systems often adopt an architecture of "grid power + generator set + high-power UPS." However, in practice, due to various reasons, generator sets or UPS systems often fail to function properly during critical grid power failures, severely impacting the secure...

  Tags : Data Center Generator UPS Stable Power Backup Solutions Generator UPS Compatibility

  Read More
• How To Operate Generator In Island Mode

  Sep 06 , 2025

  I. Definition of Islanded Operation Mode The Islanded Operation Mode (also known as "Island Mode") of a diesel generator set refers to an operating state where the generator set supplies power to a specific load or area independently after being disconnected from the public power grid. In this mode, the generator set operates completely independently. It is typically used to ensure the continuous ...

  Tags : Generator Islanding Mode Islanding Power Generator Genset Island Mode Operation

  Read More
• Diesel Generator Set Parallel Operation

  Aug 29 , 2025

  Meaning of Diesel Generator Set Parallel Operation I. Core Principles of Diesel Generator Set Parallel Operation UK Deepsea 8610  The essence of parallel operation is to use a synchronization controller to ensure that the output voltage, frequency, and phase angle of multiple generator sets remain consistent, allowing them to be safely connected to the same busbar system. Key technologies inc...

  Tags : Automatic Generator Synchronization Controller Power Management System for Generators Load Sharing Controller for Diesel Gensets

  Read More
• Busbar Expansion Solution for Diesel Generator Cable Access in Narrow Spaces

  Jul 12 , 2025

  Optimizing Cable Connections on Diesel Generator Busbars Under Tight Clearance Constraints I. Core Issue Analysis Standard Copper Busbar: 160×15mm (Cross-section: 2400mm²) Rated Current: 720A (per unit) → Parallel Total Current: ≥1440A Wiring Bottleneck Busbar terminals only accommodate single 300mm² cable (parallel 2×240mm² cables cause crowding) ...

  Tags : Alternator Busbar Expansion Diesel Generator Bus bar Cable Expansion Generator Set Bus Bar Enlarge

  Read More
• Key Considerations for SAE Interfaces in Diesel Generator Sets

  May 31 , 2025

  Key Considerations for SAE Interfaces in Diesel Generator Sets In traditional installation processes for diesel generator sets, the connection between the engine and the alternator primarily relies on a double-point linkage. The drawbacks of this double-point connection method include poor coaxial alignment, excessive noise, and susceptibility to wear in the connecting plate’s rubber ga...

  Tags : SAE J617 Compliant Generators Single-Point Mounting Generator Sets Generator SAE Interface Replacement

  Read More
• Engine Coolant Temperature Speed Sensors Function

  May 19 , 2025

  Functions of Engine Coolant Temperature Speed Sensors Abstract:As a user of emergency power systems, it is essential to understand the common sensor types, structures, and working principles of diesel engines. Key sensors include speed sensors, temperature sensors, oil pressure sensors, and coolant level sensors. Operators must master detection procedures for each sensor and ac...

  Tags : Cummins Engine Sensor Sensor On Cummins Engine Cummins Diesel Genset Function

  Read More
• Regulations on Rated Voltage, Current, and Frequency of Generator Sets

  Apr 12 , 2025

  Regulations on Rated Voltage, Current, and Frequency of Generator Sets Rated Voltage The rated voltage is the maximum safe operating voltage for continuous operation of a generator, referring to line voltage. Common ratings include: 400V / 230V: Standard for most applications (400V three-phase, 230V single-phase). 450V: Typically used for marine applications or 60Hz generator sets.&...

  Tags : Three phase Generator Alternator Stator windings Generator Set Line voltage

  Read More
• Technical Requirements for Cummins Diesel Generator Set Parallel System

  Apr 12 , 2025

  Technical Requirements for Cummins Diesel Generator Set Parallel System (1) Multi-Unit Parallel Operation Functionality Two or more generator sets must support parallel operation. Multiple generators running in parallel must have automatic/manual start and automatic/manual stop functions, which operate independently without interference.  The system must support autom...

  Tags : Parallel Operation Generator Set Seamless Transfer Genset Load Shedding Diesel Generator

  Read More
• How to Calculate Generator Capacity Based on Starting Current – Cummins Engineering Guidelines

  Apr 12 , 2025

  How to Calculate Generator Capacity Based on Starting Current – Cummins Engineering Guidelines Selecting the correct emergency generator capacity is critical for cost efficiency and operational reliability. Unlike standardized methods for transformers, China currently lacks a unified calculation formula for generator sizing, leading to common errors: Arbitrary selection (10-20% of transforme...

  Tags : Cummins Generator Capacity Selection Emergency Generator Sizing Standards Motor Starting Current Calculator

  Read More